The products that you selected had been put into inquiry basket !
Parâmetros
Características
Estrutura Chart
Pacote
Aplicação
Video
problema comum
NTL 152-T
Operating voltage
120-260V AC/DC¹ (min. 110V, max. 265V)
Heating element
PTC resistor - temperature limiting
Surface temperature
< +80°C (+176°F), except upper protective grille
Connection
4-pole terminal 2.5mm², torque 0.8Nm max.
Casing
plastic according to UL94 V-0, black
Mounting
clip for 35mm DIN rail, EN 60715
Fitting position
vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature
-45 to +70°C (-49 to +158°F)
Operating/Storage humidity
max. 90% RH (non-condensing)
Protection type/Protection class
IP20 / II (double insulated)
Note
other voltages on request
¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
Art. No.
Heating capacity
Switch-off Temperature
Switch-off Temperature
Dimensions
Weight (approx.)
152T01
50W
59 °F (15 °C)
41 °F (5 °C)
110 x 60 x 90mm
0.3kg
152T02
50W
77 °F (25 °C)
59 °F (15 °C)
110 x 60 x 90mm
0.3kg
152T03
100W
59 °F (15 °C)
41 °F (5 °C)
150 x 60 x 90mm
0.4kg
152T04
100W
77 °F (25 °C)
59 °F (15 °C)
110 x 60 x 90mm
0.3kg
152T05
150W
59 °F (15 °C)
41 °F (5 °C)
110 x 60 x 90mm
0.4kg
152T06
150W
77 °F (25 °C)
59 °F (15 °C)
150 x 60 x 90mm
0.4kg
• Low surface temperature
• Quick mounting due to clip fixing
• Double insulated (plastic)
• Wide voltage range
• Small size
Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and hygrostats can directly be connected to the heater NTL 152. This heater is also available in a version with plug-in thermostat requiring no additional wiring. The heaters are designed for permanent operation.