each except upper protective grille at +20°C (+68°F) ambient temperature
Axial fan, ball bearing
air flow, free flow
45m³/h (230VAC), 54m³/h (120VAC)
service life 40,000h at +40°C (+104°F)
Connection
2-pole clamp max. 2.5mm²,
clamping screw torque 0.8Nm max.
casing
plastic according to UL94 V-0, black
Mounting
clip for 35 mm DIN rail, EN 60715 or screw fixing (Ø 5.3mm)
Fitting position
vertical airflow (air outlet up)
operating/Storage temperature
-40 to +70°C (-40 to +158°F)
operating/Storage humidity
max.90% RH (non-condensing)
Protection type/Protection class
IP20 / ll (earthed)
Note
other voltages on request
Art. No.
Heating capacity¹
Operating voltage
Dimensions
Weight (approx.)
407DT01
150w
230VAC, 50/60Hz
94 x 70 x 52mm
0.3kg
407DT02
200w
230VAC, 50/60Hz
94 x 70 x 52mm
0.3kg
407DT03
300w
230VAC, 50/60Hz
94 x 70 x 52mm
0.3kg
407DT04
350w
230VAC, 50/60Hz
94 x 70 x 52mm
0.3kg
407DT05
150w
120VAC, 50/60Hz
94 x 70 x 52mm
0.3kg
407DT06
200w
120VAC, 50/60Hz
94 x 70 x 52mm
0.3kg
407DT07
300w
120VAC, 50/60Hz
94 x 70 x 52mm
0.3kg
407DT08
350w
120VAC, 50/60Hz
94 x 70 x 52mm
0.3kg
1 at+20°C (+68°F) ambient temperature
● Pressure clamp connectors
● Dynamic heating up
● Wide voltage range
● Energy saving
● Clip fixing, Quick installation
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify installation.