Technical Data

Technical Parameters

Normally is airflow direction"Out", if you need airflow direction "In", when place order, please advice

Time-saving assembly and maintenance

Natural's fan filters are easily installed by one person from outside the cabinet.

1.) Make cut-out in the cabinet wall. The cut edge of the cabinet opening should be free of dirt, filings and grease. A template for the enclosure cut-out is included in the delivery of the fan filter.

2.) Remove protective film from the sealing strips on the mounting frame. Press mounting frame into the cabinet opening. The frame stays permanently in the cabinet. (For size 176mm and up we recommend additional screw fixing.)

3.) Electrically connect the axial fan using the clip connectors. Push the unit into the mounting frame. Fix using screws.

4.) Insert the filter mat in the hood. Clip on. Finished.

Changing the filter mat or fan is quickly done by one person. To change the filter mat simply remove the filter hood, insert the new mat and snap the hood back again. No tools required. Maintenance of the fan can easily be done without removing the mounting frame (2).

Exit Filter with Rain-Resistance Hood NTL-F125-W

Fan filters are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating. These filter fans are intended for outdoor use. The plastic used for the hood is highly UV light resistant.