The products that you selected had been put into inquiry basket !
Parâmetros
Características
Estrutura Chart
Pacote
Aplicação
Video
problema comum
Technical Data
NTL 152 TOUCH-SAFE HEATER (SEMICONDUCTOR)
Operating voltage
120-240V AC/DC¹(min.110V,max.265V)
Heating element
PTC resistor-temperature limiting
Surface temperature
<+80℃(+176℉),except upper protective grille
Connection
4-pole terminal 2.5mm²,torque 0.8Nm max.
Casing
plastic according to UL94 V-0, black
Mounting
clip for 35mm DIN rail,EN 60715
Fitting position
vertical airflow (air outlet up,connection on bottom)
Operating/Storage temperature
-45 to +70℃(-49 to +158℉)
Operating/Storage humidity
max.90%RH(non-condensing)
Protection type/Protection class
IP20/Ⅱ(double insulated)
Note
other voltages on request
Art.No.
Heating capacity²
Air outlet temperature³
Dimensions
Weight(approx.)
860071
50W
+86℃(+186.8℉)
110×60×90mm
0.3kg
860072
100W
+120℃(+248℉)
150×60×90mm
0.4kg
860073
150W
+145℃(+293℉)
150×60×90mm
0.4kg
• Low surface temperature
• Quick mounting due to clip fixing
• Double insulated (plastic)
• Wide voltage range
• Small size
Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and hygrostats can directly be connected to the heater NTL 152. This heater is also available in a version with plug-in thermostat requiring no additional wiring. The heaters are designed for permanent operation.