The products that you selected had been put into inquiry basket !
Parâmetros
Características
Estrutura Chart
Pacote
Aplicação
Video
problema comum
NTL 154SB
Operating voltage
120-260V AC/DC or 12V DC or 24V DC or 48V DC¹ (min. 110 V, max. 265 V)
Heating element
PTC resistor - temperature limiting
Heater body
extruded aluminium profile, anodised
Connection
3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and rigid wire 0.5- 2.5mm²
Connection casing
plastic according to UL94 V-0, black
Mounting
clip for 35mm DIN rail, EN 60715
Fitting position
vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature
-45 to +70°C (-49 to +158°F)
Operating/Storage humidity
max. 90% RH (non-condensing)
Protection type/Protection class
IP20 / I (earthed)
Accessoires
screw fixing
Note
other voltages on request
Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
Art. No.
Heating capacity²
Length (L)
Weight (approx.)
860407
15W
65mm
0.25kg
860408
30W
65mm
0.25kg
860409
45W
65mm
0.25kg
860410
50W
80mm
0.35kg
860411
60W
140mm
0.35kg
860412
75W
140mm
0.45kg
860413
100W
140mm
0.45kg
860414
150W
220mm
0.65kg
² at +20°C (+68°F) ambient temperature
• Pressure clamp connectors
• Dynamic heating up
• Wide voltage range
• Energy saving
• Clip fixing, Quick installation
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify installation.