The products that you selected had been put into inquiry basket !
Parâmetros
Características
Estrutura Chart
Pacote
Aplicação
Video
problema comum
NTL 1200
Operating voltage
230VAC or 120VAC
Heating element
PTC resistor - temperature limiting
Temperature safety cut-out
to protect against overheating in case of fan failure, automatic reset
Axial fan, ball bearing
airflow, 160m³/h, free fow service life 50,000h at +25°C (+77°F)
Connection
2-pole max.2.5mm²,clamping screw with strain relief, torque 0.8Nm max.
casing
plastic according to UL94 V-0, black
Mounting
clip for 35mm DIN rail, EN 60715 or screw fxing (M6)
Fitting position
vertical airflow (air outlet up) – other fitting positions possible
With Thermostat
With thermostat to control temperature
With on/off switch
Can manual power on and off
Dimensions
182×160×120mm
Weight
approx.1.3kg
Operating/Storage temperature
-45 to +70°C (-49 to +158°F)
Operating/Storage humidity
max. 90% RH (non-condensing)
Protection type/Protection class
IP20 / II(double insulated)
Operating temperature of heater with integrated hygrostat:0 to +60℃(+32 to +140℉)
Art. No.
Model
Operating Voltage
Heating capacity
Setting range
86375
Fan Heater with thermostat
230VAC,50/60Hz
800W
0 to +60℃
86376
Fan Heater with thermostat
230VAC,50/60Hz
900W
0 to +60℃
86377
Fan Heater with thermostat
230VAC,50/60Hz
1000W
0 to +60℃
86378
Fan Heater with thermostat
230VAC,50/60Hz
1200W
0 to +60℃
86379
Fan Heater with thermostat
120VAC,50/60Hz
800W
+32 to +140℉
86380
Fan Heater with thermostat
120VAC,50/60Hz
900W
+32 to +140℉
86381
Fan Heater with thermostat
120VAC,50/60Hz
1000W
+32 to +140℉
86382
Fan Heater with thermostat
120VAC,50/60Hz
1200W
+32 to +140℉
• With on/off switch
• High heating performance
• Double insulated
• Integrated thermostat
• Optional clip or screw fixing
The compact high performance fan heater prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic housing provides double insulation and acts as protection against contact. The fan heater is available with integrated thermostat for temperature control. The CS 130 was designed as a stationary unit for wall fixing. For fixing on the bottom of the enclosure the fan heater CS 030 is recommended.