The products that you selected had been put into inquiry basket !
Parâmetros
Características
Estrutura Chart
Pacote
Aplicação
Video
problema comum
Technical Data
Switch temperature difference
+/-5℃
sensor element
thermostatic bimetal
Contact type
snap-action contact
service life
>100000 cycles
Max.switching caoacity
250VAC,10(2)A/120VAC,15(2)A DC 30W at 24VDC to 72VDC
MAx.inrush current
AC 16A for 10 sec
Connection
Mounting
clip for 35mm DIN rail,EN 60715
Casing
plastic according to UL94 V-0,light grey
Dimensions
60×33×43mm
Weight
approx.40g
Fitting Position
variable
Operating/Stirage temperature
-45 to +80℃(-49 to +176℉)
Operating/Stirage humidity
max.90% RH (non-condensing)
Protection type
IP20
¹ When connecting with wires, wire end ferrules must be used.
Art.No.Contact breaker(NC)
Art.No.Contact maker(NO)
Setting range
11140.0-01
11141.0-01
0 to +60℃
11142.0-01
11143.0-01
-10 to +50℃
11159.0-01
11158.0-01
+20 to +80℃
11140.9-01
11141.9-01
+32 to +140℉
11142.9-01
11143.9-01
+14 to +122℉
> Large setting range
> Small size
> Simple to mount
> High switching performance
DMO 1140: Thermostat (normally closed); contact breaker for regulating heaters. The contact opens when temperature is rising.
DMS 1141: Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for switching signal devises when temperature limit has been exceeded. The contact closes when temperature is rising.
Important note: The contact system of the regulator is subjected to environmental influences, thus the contact resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.